• 4.8-liter 72-degree V10 putting out 560 hp at 8,700 RPM (that’s 116.5 hp/liter) and 354 lb.-ft. of torque at 6,800 RPM
• Redline: 9,000 RPM
• Titanium valves, connecting rods, forged aluminum pistons, dry sump lubrication and a titanium exhaust manifold
• Six-speed sequential gearbox
• Torsen limited slip differential
• 3,263 pounds with a 48/52 front-to-rear weight distribution
• Power-to-weight ratio of 5.8 pounds/hp
• 65 percent of the body is carbon fiber
• 20-inch BBS wheels wrapped in 265/35 ZR20 Bridgestone tires in front and 305/30 ZR20 in the rear.
• 0-62 MPH (100 km/h) in 3.7 seconds
• Top speed of 201.94 MPH
• Production limited to 500 units

The price premium for this car will be $375,000, but I am sure there will not be any problems selling them, due tot he exclusivity of the production run of only 500 units.  We are looking forward to some real road tests soon. 

[Show as slideshow]

[View with PicLens]

PRESS RELEASE:

Tokyo, October 21, 2009 – Lexus announces today the official launch of the LFA, a two-seat supercar scheduled to go into production at the end of 2010 as the pinnacle of the Lexus “F” premium sports car series. Pre-sales start today.

Ultra-responsive and extremely stable even when taken to the edge, the LFA creates a sense of reassurance that opens up a new world of driving emotion, exhilarating the senses to move the driver in more ways than one.

The LFA combines high output, superb chassis design and meticulous aerodynamics to achieve instantaneous total-vehicle response characterized by high-rev, seamless acceleration echoed by a self-defining resonance from its 4.8-liter V10.

Only 500 units of the LFA are to be produced and sold worldwide.

A prototype of the LFA is now on display at the 41st Tokyo Motor Show, which is open to the general public from October 24 to November 4 at Makuhari Messe in Makuhari, Chiba Prefecture.

1. Packaging brings out the most in fundamental performance

Strong and light

The newly developed 4.8-liter V10 engine boasts exceptional power, while lightweight materials (aluminum alloy, magnesium alloy and titanium alloy) and a very compact size (smaller than a conventional V8) allows for optimal weight distribution and an exceptional power-to-weight ratio.

Carbon fiber reinforced plastic (CFRP) cabin enhances high body-rigidity and reduces weight. This unique cabin is 100kg lighter than a comparable aluminum cabin. Detailed analysis and precise matching of CFRP materials allows for high rigidity and low weight. LFA CFRP production technology, including unique CFRP-to-metal joining, was completely developed by Lexus.

Balanced
Relatively higher weight components such as the engine and transmission are placed within the wheelbase. A low center of gravity is made possible by the use of dry sump lubrication1, along with placing peripheral components (oil pump, water pump) behind the engine. Furthermore, optimal placement of the transmission and the fuel tank in front of the rear axle adds to this application of centralized mass. This minimizes weight shift during cornering and contributes to outstanding performance and stability. Lighter weight components, like the radiator and electric fans, are placed behind the rear axle.

Combined with a front-engine and rear-wheel-drive configuration, the short, wide and low body allows the LFA to achieve its target front-to-rear weight distribution of 48:52.

Driver-centered
The driver’s seat is positioned near the LFA’s center of gravity. The centralized seating concept (with the seat between the front and rear axles and closer to the left–right center) is made possible by the use of a rear transaxle and vertically stacked torque tube and exhaust pipes reducing the width of the center tunnel. The driver placement is aimed to provide maximum car-to-driver feedback, especially under sport or high G-force driving conditions.


2. Emotive performance embodies an extraordinary driving experience

High–rev engine

Titanium valves, ultra–light weight rocker arms with a diamond–like coating and a fully integrated lower crankcase that reduces pumping losses at high RPMs combine to provide the driver with overwhelming acceleration right up to the 9,000rpm redline. The LFA’s purpose-built V10 delivers 90% of its peak torque between 3,700rpm and 9,000rpm.

Precise Response

Independent, electronically controlled throttle bodies ensure precise air-feed to each of the 10 cylinders, enabling immediate engine response from the accelerator pedal. The engine response time is approximately half the normal response time of a single-throttle valve.

The six-speed ASG transmission features heavy-duty synchronizer rings and a newly developed gearshift actuator, providing the driver with a very direct shift feel. Four selectable driving modes and a seven-stage shift-speed selector that results in upshift speeds down to 0.2 seconds provide a higher level of driver control.

Track-sized high-performance (Carbon Ceramic) CCM brake discs and Electronically Controlled Braking system generate ultra-powerful yet stable braking.

Responsive handling and engaging dynamics

The very light and rigid CFRP cabin, combined with a front double-wishbone suspension and a rear multilink suspension, result in a very stable, controlled ride. Detailed aerodynamic engineering results in elements such as a flat underbody, a diffuser and a speed-controlled rear wing, which allows precise vehicle response at all vehicle speeds, thus creating unity between driver and machine.

Vehicle Dynamics Integrated Management integrates numerous vehicle dynamic functions that provide a high level of vehicle stability and preventative safety without interfering with the driver’s intentions, especially when sport driving.

Exciting engine sound and L-finesse2 design
Equal-length exhaust manifolds combined with an equal-length dual exhaust system routed through a multistage titanium main muffler fine tunes the exhaust note.

An acoustically tuned surge tank linked to 10 individual throttle bodies creates a powerful induction sound. The coordination of intake and exhaust sounds overlap at various RPMs to create a unique, exciting and inspired soundtrack.

The exterior design includes carefully tuned aerodynamics and airflow management. The use of CFRP, in addition to strength and weight advantages, frees up the design of the exterior panels allowing a fresh supercar L-finesse design. The interior design combines state-of-the-art instrument-panel design and technology, along with a variety of custom-tailored interior trim packages to suit the most discerning driver.

Subaru has announced a new version of the WRX STI Carbon that will debut at the Tokyo Auto Show.

There does not seem to be too many changes accept for a carbon fiber roof, five-speed automatic transmission (rumored to be borrowed from the Legacy) and suede seats and dash board.  Now, we like the roof, don’t get us wrong.  No one argues that removing some extra weight and lowering the center of gravity is a bad thing for the STI, but an auto transmission?  I am sure many of you will be questioning what is Subaru thinking?  Well, Subaru says that the five-speed auto is there to offer a pleasure of driving this vehicle to a much wider range of customers.  I can understand the need to sell more cars but what about the purity of what this car is all about?  Looks like Subaru may be heading in the same direction that Mitsubishi Evo X did.  

Nice luxury interior may make sense as an option to those who want it, as well as a carbon fiber roof, which I am sure as a Subaru enthusiast like myself would definitely opt in for.  But if this is the road that Subaru has chosen, I really hope for their sake it is at least a dual clutch sequential transmission and not just your regular auto tranny.  I guess we will have to wait and see the exact specs.  There is still no word weather it will even make it here to US and what the price will be.

Maranello 12 May 2009 – Ferrari’s Board of Directors, chaired by Luca di Montezemolo, today analysed the first quarter results for 2009. Despite the current international economic climate, which has hit the automotive sector in particular, Ferrari’s figures were in line with the record levels reached in 2008.

Turnover for the first three months was 441 million euro compared to 455.7 million euro over the same period in 2008. The first quarter closed with a trading profit of 54 million euro compared to last year’s 59 million euro.

These results reflect the introduction of new models, in particular the success of the Ferrari California and the Scuderia Spider 16M, the constant growth in activities linked to the brand (e-commerce, licensing, merchandising and retail) and the company’s continuing efforts to maximise efficiency.

The Board of Directors also examined developments related to recent decisions taken by the Federation Internationale de l’Automobile during an extraordinary meeting of the World Motor Sport Council on 29 April 2009. Although this meeting was originally called only to examine a disciplinary matter, the decisions taken mean that, for the first time ever in Formula 1, the 2010 season will see the introduction of two different sets of regulations based on arbitrary technical rules and economic parameters.

The Board considers that if this is the regulatory framework for Formula 1 in the future, then the reasons underlying Ferrari’s uninterrupted participation in the World Championship over the last 60 years – the only constructor to have taken part ever since its inception in 1950 – would come to a close.

The Board also expressed its disappointment about the methods adopted by the FIA in taking decisions of such a serious nature and its refusal to effectively reach an understanding with constructors and teams. The rules of governance that have contributed to the development of Formula 1 over the last 25 years have been disregarded, as have the binding contractual obligations between Ferrari and the FIA itself regarding the stability of the regulations. The same rules for all teams, stability of regulations, the continuity of the FOTA’s endeavours to methodically and progressively reduce costs, and governance of Formula 1 are the priorities for the future. If these indispensable principles are not respected and if the regulations adopted for 2010 will not change, then Ferrari does not intend to enter its cars in the next Formula 1 World Championship.

Ferrari trusts that its many fans worldwide will understand that this difficult decision is coherent with the Scuderia’s approach to motor sport and to Formula 1 in particular, always seeking to promote its sporting and technical values. The Chairman of the Board of Directors was mandated to evaluate the most suitable ways and methods to protect the company’s interests.

A new concept car Peugeot RD has been introduced to the public at Shanghai Motor Show.

The main innovative operating feature of the Peugeot RD concept car is its ingenious system of articulation that provides irreproachable road holding allied with the ability the easily thread its way through urban traffic.

Equipped with an environmentally friendly electric motor, the driving position in this single-seat concept offers a new feeling of freedom, thanks to its panoramic vision, voice-message driving assistance and a heads-up display system that gives all the information required for travelling in complete safety.

This concept car combines the sensations of a 3-wheeled scooter with the driving pleasure of a saloon car, while retaining all the essential functions of both modes of transport… and while adding a silent environment.

As you would expect, being accessible, solid and extremely simply designed, the Peugeot RD concept car fits perfectly with the complicated mobility constraints you would encounter in a megalopolis of the future.

Carlos Arturo Torres Tovar
Carlos Arturo Torres Tovar is a young, 27 year old Colombian who grew up in the small industrial town of Tunja. Since childhood, he has been working and modelling in clay and is passionate about sculpture. Accordingly, he has drawn, sketched and sculpted a host of objects, especially cars, in all sorts of materials ….

Sourse: Peugeot